Rosnek 7-Piece Spiral Metric Tap Drill Bits Set with Protective Storage Case, Stainless Steel Bits, M3/m4/m5/m6/m8/m10/m12, Size: M3,M4,M5,M6,M8,M10

By A Mystery Man Writer

20Sept2024

HHS-M2 HardnessHRC.68 M2(W6Mo5Cr4V2 High-speed steel) is the standard and most widely used industrial HSS. It has small and evenly distributed carbides giving high wear resistance, although its decarburization sensitivity is a little bit high. After heat treatment, its hardness is the same as T1, but its bending Strength can reach 4700 MPa, and its toughness and thermo-plasticity are higher than T1 by 50%.

Rosnek 7-Piece Spiral Metric Tap Drill Bits Set with Protective Storage Case, Stainless Steel Bits, M3/M4/M5/M6/M8/M10/M12

Drill Bit Black And Decker

1PC M10 M12 M14 M16 M18 M20 Metric HSS Right Hand Thread, 48% OFF

Blind Hole Tapping Tools

HOLE PUNCH SPANNER

HHS-M2, Hardness：HRC.68, M2(W6Mo5Cr4V2 High-speed steel) is the standard and most widely used industrial HSS. It has small and evenly distributed

Rosnek 7-Piece Spiral Metric Tap Drill Bits Set with Protective Storage Case, Stainless Steel Bits, M3/M4/M5/M6/M8/M10/M12

Slugger Mag Drill

HHS-M2, Hardness：HRC.68, M2(W6Mo5Cr4V2 High-speed steel) is the standard and most widely used industrial HSS. It has small and evenly distributed

Rosnek 7-Piece Spiral Metric Tap Drill Bits Set with Protective Storage Case, Stainless Steel Bits, M3/M4/M5/M6/M8/M10/M12

1PC M10 M12 M14 M16 M18 M20 Metric HSS Right Hand Thread, 48% OFF

Orifice Drill Bits