No Roll Bank Sinker Mold for Fishing Weight Deep Water 7oz 9oz Lead Casting
Answer: They are slip weights, no eye needed. They slide on your line. I just took a wire coat hanger cut a 3 in piece out with a bend at the top
No Roll Bank Sinker Mold for Fishing Weight Deep Water 3 4 5 oz Lead Pouring New
Sinker Usage Guide Total Tackle Australia
Lead Sinker Molds
BANK SINKER MOLD - Tightlines Tackle Co.
Do-It Bank Sinker Mold
Do-It Bank Lead Sinker Mold and 2, 3, 4, and 5 Ounce
Bank Sinker Mould With 5 Cavities and 1,2,3-Ounce How to make sinkers: 1. Ensure you are wearing protective clothing and all care must be taken when
Bank Sinker Mold with 5 Cavities and 1,2.3-Ounce,Without Handle
The flat low profile does not drift with the current so your line stays in place. A CP332 Core Pin for each cavity is included. Core pins can be stripped away immediately in the mould or later after the extracted parts have cooled. Extra CP332 parts are available to increase moulding speed.
Do-it No-Roll Sinker Mold
2 Cavity Cod Sinker / Deep Drop Weight Mold. Mold makes (2) 4 LB weights. The weights have a diameter of just over 1 1/4 so they will fit
Cod Sinker / Deep Drop Weight Mold 4 LB ( 2 Cavity )
Bank on this sinker to lower your line to new depths, and you'll pull 'em in like chump changein fresh or saltwater.
Do It Bank Sinker Mold | Tackle Bandit
16oz = 1lb. Up for your consideration a new aluminum lead casting mold. Cnc machined from 6061-T6 aluminum alloy Phenolic handles mounted to stainless
Rock Cod Sinker molds 16 to 80oz Deep Drop 1lb-5lb Single Production Combination
Sinker Usage Guide Total Tackle Australia
Muskyshopcatalog by 5 Star Marketing & Distribution - Issuu